Insulation in Four Corners, TX

Four Corners sits in the northeast corner of Fort Bend County, next to Mission Bend and just west of Highway 6. We work here from our base in Sugar Land. We do not have an office in Four Corners, but we drive out for estimates and installs.

Insulation needs in Four Corners homes

Four Corners began as a community of extended families, and by 2011 it had become a rapidly suburbanizing area. That mix shows up in the housing. Around the old crossroads of Boss Gaston, Old Richmond and Richmond Gaines roads, you find aging small frame houses and mobile homes. Closer to Highway 6, north of McKaskle Road and south of Riverside Grove Drive and Stanbridge Drive, there are newer houses built as the area grew.

Those two kinds of building need different things. An older frame house often has thin or settled insulation, gaps around the attic hatch and wall plates, and ducts running through a hot attic. A newer house is usually insulated to a standard, but the attic can still leak air around recessed lights, plumbing stacks and wiring holes. We start by looking at which of these describes your house, not by pushing one product.

Older frame houses and mobile homes: what to check first

If your house is one of the small frame homes near the original crossroads, start in the attic. Look for flattened batts, bare spots, dark streaks on the insulation where air is leaking through, and any sign that rodents have been in it. Wall cavities in older frame houses are often empty or only partly filled, and a few rooms may feel much hotter or colder than the rest.

Mobile homes have their own limits. The roof and floor cavities are shallow, so the material you choose matters more than the amount. Closed-cell spray foam gives more resistance in a thin space than batts do, which is why it comes up often on these jobs. We will tell you plainly if the cheaper fix is air sealing and a top-up of what is already there.

About Four Corners: Four Corners, TX on Wikipedia · Four Corners on Google Maps